Adaptive Re‑Use Ordinance 2.0: Turning Offices into Housing
Los Angeles, like many big cities, is dealing with two major challenges at once: not enough housing and too many empty office buildings. The COVID-19 pandemic changed how people work, leaving many commercial towers and office parks half full — or completely empty. At the same time, the city’s housing shortage has become critical, especially for homes near transit, jobs, and schools.
That’s where Adaptive Re‑Use Ordinance 2.0 comes in.
This new law builds on LA’s earlier reuse policy from 1999. It now applies citywide and makes it easier for developers to turn old office buildings into homes. With fewer restrictions and a faster approval process, the ordinance opens the door to converting thousands of empty offices into housing people desperately need.
But this isn’t just about saving old buildings. Adaptive reuse helps the city:
Add new housing without building on open land
Keep historic architecture while cutting construction waste
Bring new life to empty business districts
Reduce long commutes by encouraging people to live closer to work and transit
In this article, we’ll break down how the new ordinance works, what’s different from before, and how it could reshape neighborhoods across LA.
How the Original Adaptive Re‑Use Policy Laid the Groundwork — And Why It Fell Short
Los Angeles was a national leader in adaptive reuse when it passed its first ordinance back in 1999. That law focused on a single area: Downtown LA. It allowed older commercial buildings — built before 1974 — to be turned into apartments or condos without going through a long approval process.
How Adaptive Re‑Use Ordinance 2.0 Changed the Rules
🏙️ Citywide Eligibility
ARO 2.0 expands reuse beyond Downtown—any building 15+ years old is eligible citywide.
📄 No EIR Required
Qualifying projects skip CEQA review, speeding up permits and cutting pre-construction costs.
🚫 Design Rules Relaxed
No more unit size minimums or parking mandates—developers have more flexibility.
🏗️ Historic Reuse Bonus
Streamlined review under California Historical Building Code encourages preservation.
What ARO 1.0 (1999) Did for Downtown Los Angeles
This policy worked better than expected:
Over 12,000 housing units were created in just 15 years
Iconic buildings like the Eastern Columbia Building and Spring Arcade were brought back to life
The policy showed how flexible rules could unlock housing — without needing new land or full-scale demolitions
But there was a problem: the ordinance only applied to Downtown, not the rest of the city. That meant large areas — like the Westside, San Fernando Valley, and South LA — missed out on these benefits. Plus, many newer buildings were excluded, even though they were no longer used as offices.
Why Los Angeles Updated the Ordinance to Work Citywide in 2024
By the 2020s, the office vacancy problem had spread far beyond Downtown. Remote work became normal, and companies didn’t need as much space. Meanwhile, LA was falling behind on its state housing goals. Under California’s Housing Element law, the city must plan for over 450,000 new homes by 2029.
To keep up, local leaders realized the city needed new tools — and fast.
Here’s what they set out to do with Adaptive Re‑Use Ordinance 2.0:
Allow more buildings — not just those built before 1974
Apply the rules across the entire city, not just Downtown
Cut down on red tape to speed up housing approvals
Encourage affordability while giving developers useful incentives
In 2024, the updated ordinance was officially approved.
What Changed Under Adaptive Re‑Use Ordinance 2.0 — and Why It Matters
The updated policy is broader, simpler, and easier to use. It’s built to meet today’s housing needs while using what we already have — empty buildings.
Buildings at Least 15 Years Old Can Now Be Converted Without Special Approvals
This is the biggest shift in the ordinance.
Old Rule (ARO 1.0) | New Rule (ARO 2.0) |
---|---|
Only buildings built before 1974 | Any building that is 15+ years old qualifies |
Applies only in Downtown | Applies citywide (all LA neighborhoods) |
Only office or commercial use allowed | Applies to schools, hotels, retail, industrial |
Many zoning hurdles | By-right approvals with clear eligibility rules |
Now, any commercial building 15 years or older qualifies automatically. And if a building is between 5 and 15 years old, it may still qualify — but it needs a Conditional Use Permit (CUP).
This opens up huge potential across LA, from underused business parks in the Valley to old hotels near LAX.
The Approval Process Is Now Faster and More Predictable
Before, converting a building meant facing LA’s complicated planning system. Developers often got stuck in red tape — environmental reports, plan reviews, and unpredictable hearing schedules.
Under the new rules:
No new Environmental Impact Report (EIR) is needed
Many projects are exempt from site plan review
Zoning approvals are clearer and faster, especially for eligible buildings
This means shorter timelines, fewer delays, and more predictable costs — all key to getting housing built quickly.
Old Building Design Standards No Longer Block Creative Housing Layouts
In the past, strict rules made many conversions impossible — especially in odd-shaped buildings. Now, ARO 2.0 removes those barriers:
No minimum unit sizes — micro-units and dorm-style layouts are allowed
Open space rules are flexible — especially for smaller lots
Parking minimums are waived — especially near public transit
Roof decks and communal areas don’t count against floor space
This gives developers freedom to design for modern lifestyles — and fit more homes into the same space.
Incentives Encourage Affordable Housing and Community Benefits
While the ordinance creates new opportunities, it also includes checks to make sure the public benefits. For example:
Developers must pay a Linkage Fee, which funds affordable housing programs
Projects that include income-restricted units may get bonus incentives like added height or density
Historic buildings get added flexibility under state preservation laws
This balanced approach encourages growth — without leaving behind lower-income communities.
How Government Incentives Make Office-to-Housing Projects More Feasible
Turning an office building into homes takes more than just a good design. Developers also need funding, fast approvals, and fewer risks. That’s why Los Angeles didn’t stop at passing Adaptive Re‑Use Ordinance 2.0 — it backed the policy with help from local, state, and federal programs.
These incentives play a big role in making projects pencil out — especially when building costs are high or older structures need major upgrades.
The City of Los Angeles Has Aligned Adaptive Re‑Use With Its Housing Goals
ARO 2.0 works hand-in-hand with other city programs designed to meet LA’s state housing target of 450,000+ new homes by 2029.
Here’s how it fits into the bigger picture:
Housing Element Compliance: The reuse ordinance supports LA’s long-term housing plan by unlocking more sites.
CHIP (Citywide Housing Incentive Program): This new program stacks incentives like parking waivers, extra floor area, and faster review for qualifying housing projects.
Zoning Code Updates: Citywide zoning reforms allow more mixed-use and residential development in commercial corridors — a key feature of ARO 2.0 projects.
These overlapping programs give developers more tools — and more confidence — to move forward with conversions.
California Has Made Office-to-Housing Projects a Statewide Priority
It’s not just Los Angeles pushing for more adaptive reuse. The State of California is investing big to make conversions easier everywhere.
Key policies include:
The Office-to-Housing Conversion Act (2023), which encourages cities to allow by-right conversions and relax local codes.
$400 million in state grants to help cities fund predevelopment studies, infrastructure upgrades, and affordable housing components.
CEQA streamlining for qualifying reuse projects — especially those near transit or in existing buildings.
This kind of state support helps reduce costs and remove delays — especially for projects that might otherwise get stuck in long environmental reviews.
Federal Programs Offer Tax Credits and Low-Cost Financing
While most policy action happens at the city or state level, the federal government offers key financial tools that help close funding gaps.
Here are a few programs developers rely on:
Federal Historic Tax Credit: Offers a 20% tax credit for certified rehab work on eligible historic buildings. This is especially helpful for preserving LA’s older office towers and theaters.
HUD CDBG (Community Development Block Grants): Cities can direct federal funds toward adaptive reuse when the project includes affordable housing or supports public infrastructure.
TIFIA and RRIF Loans: These federal programs fund transportation-linked housing projects. If a reuse site sits near a Metro station, it may qualify for low-interest financing.
These incentives won’t fully fund a project on their own, but when combined with city and state support, they make more conversions viable.
How These Incentives Work Together to Support Adaptive Re‑Use Projects
Think of these programs like puzzle pieces. On their own, each one helps a little — but together, they reduce both cost and risk.
Level | Program or Policy | What It Does |
---|---|---|
Local (City of LA) | ARO 2.0 + CHIP | By-right conversions, flexible rules, bonus incentives |
State (California) | Office-to-Housing Act + CEQA relief | Fast-track approvals, state funding, zoning model code |
Federal (U.S.) | Historic Tax Credits, HUD CDBG, TIFIA | Financing tools for preservation, transit, affordability |
This “stacked” approach to incentives gives developers a much better shot at getting financing, securing permits, and starting construction — especially in areas where conversions might not otherwise make financial sense.
How Other U.S. Cities Are Turning Offices Into Homes
Los Angeles isn’t the only city trying to fix its housing crisis by reusing empty office buildings. Across the country, many cities are dealing with the same issue: too much unused office space and not enough housing.
To solve this, cities like New York, San Francisco, and Chicago are changing their laws, offering tax breaks, and speeding up permits. Each city has its own approach, but the goal is the same — turn unused buildings into livable homes.
New York City Wants to Turn Midtown Offices Into Apartments
New York is updating its zoning laws through a plan called “City of Yes for Housing Opportunity.” The goal is to make it easier to turn older offices into homes — especially in Midtown Manhattan.
Here’s what they’re doing:
Letting housing projects happen in more parts of the city
Making it easier to build smaller apartments, including shared living spaces
Allowing bigger buildings with more housing (by changing floor area rules)
Giving tax breaks if developers include affordable units
If the plan works, the city could create up to 20,000 new homes in central neighborhoods where office buildings now sit empty.
San Francisco Is Offering Tax Breaks and Relaxed Rules
San Francisco’s downtown office vacancy is one of the worst in the country. In response, the city is giving developers more freedom to convert offices into housing.
Here’s what’s changing:
The city waived transfer taxes for office-to-housing projects
It relaxed rules about unit size, window access, and outdoor space
The planning department created a guide to help developers
Some city-owned buildings are being turned into housing for students or low-income residents
These changes are already attracting developers — especially in areas like SOMA and the Financial District.
Other Cities Are Testing New Reuse Programs
Many other cities are also trying adaptive reuse — each in their own way. Some are offering money. Others are changing zoning. Here’s how some of them compare:
City | What’s Happening | Expected Impact |
---|---|---|
Chicago | $197M for downtown conversions; 30% units must be affordable | 1,600+ new homes |
Washington D.C. | $250M fund + tax credits for reuse in the city center | 4,000–5,000 homes by 2030 |
Boston | Fast permits and bonus height in pilot reuse areas | Results expected in 2025 |
Buffalo | Tax breaks + reuse program for historic buildings | Nearly 2,000 homes created |
What Los Angeles Can Learn From These Cities
Los Angeles is already ahead in many ways. ARO 2.0 covers the whole city and makes it easier to start a project. But there are still ideas LA could borrow from other cities:
Funding support like Chicago’s could help more projects move forward
Clearer project guides, like San Francisco’s, could help smaller builders
More affordable housing incentives, like those in D.C., could help meet citywide housing goals
Flexible zoning for shared housing, like in New York, could make deeper buildings usable
Each city is still learning, and so is Los Angeles. As more buildings get converted, there will be more chances to improve the process.
How the Office-to-Housing Conversion Process Works in Practice
Adaptive reuse sounds simple — turn an old office into housing — but it’s rarely that easy. Every building is different. Some have layouts that work well for apartments. Others don’t. And even with ARO 2.0 in place, the process still involves several key steps.
Let’s walk through what really happens when a developer decides to convert an office into housing.
Step 1: Check if the Building Can Be Reused
Before anything is built, the developer needs to study the building. Not every office is a good match for housing.
They usually look at:
The building’s shape — Does it have enough windows, or is it too deep inside for natural light?
Structural layout — Can rooms, kitchens, and bathrooms fit inside the existing floor plan?
Plumbing and electrical systems — Will it be too expensive to add the pipes and wiring needed for homes?
Code upgrades — Does the building meet today’s safety rules, like earthquake protection or fire exits?
Some buildings — especially older or historic ones — are easier to reuse. Others may need too many changes to make the numbers work.
Step 2: Apply for Permits and Final Approvals
With ARO 2.0, many approvals are faster. But developers still need to follow the rules and submit detailed plans.
That usually includes:
Drawings that show how units will be laid out
Reports showing that the building meets fire, seismic, and accessibility standards
Inspections from city departments before construction begins
Coordination with LADBS (Department of Building and Safety) and, if needed, the Planning Department
If the building is more than 15 years old, the project can move forward “by right.” That means no extra approvals or hearings are needed. But if it’s between 5 and 15 years old, the developer must request a Conditional Use Permit — which takes more time and public input.
Step 3: Do the Construction — and Deal With the Cost
Once approvals are in place, construction begins. This is where many of the big costs show up.
Unlike new construction, where everything is built from scratch, adaptive reuse projects must work around what already exists. That often means:
Upgrading old plumbing and electrical systems
Rebuilding stairwells or elevators to meet modern codes
Cutting new windows or adding light wells for better ventilation
Reinforcing the building to meet seismic rules, especially in LA
These upgrades take time, and they aren’t cheap. In fact, many reuse projects end up costing more per square foot than building new.
That’s why incentives from ARO 2.0 — like faster permits, flexible design rules, and bonus zoning — are so important. Without them, many buildings would stay empty.
What Cities Are Doing to Support Office-to-Housing Conversions
City | Program/Policy | What It Does |
---|---|---|
Los Angeles | ARO 2.0 + CHIP | Citywide eligibility, fast-track permitting, flexible zoning, affordability options |
New York City | City of Yes | Expands zoning for housing, allows smaller units, bonus incentives for affordability |
San Francisco | Office Reuse Relief | Tax waivers, zoning reforms, pilot conversions in downtown zones |
Chicago | LaSalle Street Reimagined | Subsidies for reuse projects with 30% affordable housing requirement |
Why Developers Still Face Challenges — Even With a Good Ordinance
While ARO 2.0 makes conversion easier, developers still face big challenges. These include:
Unpredictable costs — especially for older buildings with hidden problems
Financing difficulties — many banks are still cautious about funding reuse projects
Slow utility upgrades — projects may be delayed waiting for new power, water, or sewer connections
Public pushback — some neighbors oppose changes to local building types, even when they add housing
That’s why it’s not enough to just change the rules. City leaders, agencies, and builders need to keep working together — solving problems as they come up and improving the system as more projects move forward.
The Big Picture: Conversions Won’t Solve Everything — But They Help a Lot
Adaptive reuse isn’t a silver bullet. It won’t fix LA’s housing crisis overnight. But it is one of the fastest, smartest tools the city has to add new homes without sprawl, high-rise battles, or long zoning fights.
With ARO 2.0, Los Angeles has made a strong move. By opening the door to more conversions — and backing it with local, state, and federal support — the city is giving underused spaces a new future.
And for thousands of Angelenos waiting for a decent place to live, that’s a step in the right direction.
Conclusion: A New Future for LA’s Old Buildings
The Adaptive Re‑Use Ordinance 2.0 isn’t just a policy update — it’s a shift in how Los Angeles sees its future. Instead of letting office buildings sit empty, the city is turning them into homes. Instead of endless sprawl, it’s using what it already has.
This updated law opens the door for:
More housing in places where it’s needed
Faster project approvals with fewer zoning delays
Creative reuse of buildings that once felt outdated
A better balance between growth, affordability, and design
But policies alone aren’t enough. For adaptive reuse to succeed, city agencies, private developers, local communities, and state leaders must keep working together. Every successful conversion is proof that LA can grow smarter — without sacrificing livability.
Other cities are watching. What Los Angeles does next could shape how adaptive reuse is handled across the country. With the right follow-through, this ordinance could help LA build a housing future that’s more flexible, more sustainable, and more human.
Have an empty office building and wondering if it could become housing?
At JDJ Consulting Group, we make complex policies like ARO 2.0 easier to understand — and even easier to act on. Whether you’re exploring a potential conversion or already deep in planning, we’ll help you:
Understand if your building qualifies
Navigate permits and zoning with confidence
Unlock incentives that make your project more viable
Save time, avoid red tape, and move forward with clarity
Let’s talk about what’s possible. Our team of expert Los Angeles land consultants is here to answer your questions, guide your next steps, and help you make the most of LA’s adaptive reuse opportunities.
Call us at +1 (818) 827‑6243 or contact us online to schedule your FREE consultation.
Frequently Asked Questions (FAQs)
What is Adaptive Re‑Use Ordinance 2.0 and how does it change the rules in Los Angeles?
Adaptive Re‑Use Ordinance 2.0 is a citywide policy that allows older commercial buildings—like offices, hotels, and schools—to be converted into housing with fewer zoning and permitting barriers. It builds on the 1999 law but removes major restrictions.
Key updates include:
Applies citywide, not just Downtown LA
Covers buildings 15+ years old (and 5–15 years with a CUP)
Offers by-right approvals, skipping lengthy reviews
Relaxes building design standards for unit size, parking, and open space
Which types of buildings are eligible under ARO 2.0?
The new ordinance applies to a wide range of commercial buildings—far beyond just old office towers.
Eligible building types include:
Offices, retail spaces, and warehouses
Former schools, hospitals, or motels
Industrial and mixed-use buildings
Historic or landmark structures (with added flexibility)
Buildings must generally be 15 years or older, or 5–15 years with special approval. You can explore if your site qualifies with JDJ’s adaptive reuse consulting team.
Does Adaptive Re‑Use 2.0 make the permitting process faster?
Yes. ARO 2.0 significantly speeds up the timeline for eligible projects by cutting out layers of review and CEQA analysis.
The streamlined benefits include:
No new Environmental Impact Report (EIR) required
No site plan review for by-right conversions
Reduced public hearings for qualified buildings
Clear zoning code language for approvals
Are affordable housing requirements included in Adaptive Re‑Use Ordinance 2.0?
Yes — ARO 2.0 encourages, but does not mandate, affordable housing. However, affordability is built into the program through incentives and fees.
Here’s how:
All projects must pay the Linkage Fee, which funds affordable housing citywide
Developers who include income-restricted units can receive bonuses (e.g., extra height or FAR)
Historic buildings get flexibility for preservation when combined with affordability
What challenges still exist for office-to-housing conversions?
Even with ARO 2.0, not every project will be easy or profitable. Developers face a number of on-the-ground obstacles:
High retrofit costs for plumbing, windows, and seismic upgrades
Deep floorplates that reduce natural light and airflow
Financing gaps, especially for first-time or mid-sized developers
Utility delays or limited grid capacity in some districts
That’s why a strong feasibility analysis is essential early on. Talk to JDJ Consulting Group about what to expect.
How does Adaptive Re‑Use Ordinance 2.0 support sustainability in development?
Adaptive reuse is one of the greenest forms of development, and ARO 2.0 helps make it standard practice in Los Angeles.
Key environmental benefits include:
Reduced construction waste by preserving existing structures
Lower carbon footprint compared to ground-up development
Supports denser, more transit-accessible housing
Promotes walkability in underutilized commercial corridors
These benefits align with LA’s climate action goals and SB 131 streamlining tools. Adaptive reuse is both smart and sustainable.
Resources
Disclaimer
This article is for general informational purposes only and is not legal or development advice. Policies may change. Always consult a qualified planner, consultant, or attorney before starting an adaptive reuse project.
🏗️ The Office-to-Housing Conversion Process Under ARO 2.0
-
Step 1: Building Assessment
Developers begin by assessing structure, layout, and systems. Natural light, floorplate depth, plumbing, and seismic stability all play a role.
-
Step 2: Planning & Approvals
Projects submit architectural plans and apply for by-right approval (15+ years old) or CUP (5–15 years). LADBS and planning reviews follow.
-
Step 3: Design Adjustments
Teams align layouts with ARO 2.0 flexibility — removing parking minimums, adjusting for light/air, and applying open space or FAR bonuses.
-
Step 4: Construction & Retrofit
Construction crews upgrade plumbing, HVAC, windows, and structural elements. Existing materials are reused where possible to reduce waste.
-
Step 5: Final Inspection & Leasing
After inspections and utility connections, the units are ready to lease — providing much-needed housing in formerly vacant buildings.
0 Responses